Monday, July 12, 2010

How to control the car when brakes are not working

Car Brake
Brakes is a vital component in the car. As a vehicle stop system speed, when suddenly needed or when brakes are not working, should be treated with care.


Brakes do not work mostly at large or heavy vehicles. But not impossible, the disorder occurs in passenger cars. The cause could be due to the brake hose is leaking, piston jams, or lining up.

When brakes do not work, the steps that need to be done is as follows:

  1. Try pumping the brakes as soon as possible.
  2. If it fails, lower the gear gradually. Do not just two or three gear at a time, making the engine revolution exceeds the maximum limit and collapsed.
  3. Gently pull the handbrake on a regular basis without removing the retaining button so that the rear wheels do not lock.
  4. When should immediately stop because there in front of the vehicle, place car to a safe place such as sidewalks, cliffs, bushes, fence or object that can stop the car.

If the conditions are still good brakes, driver braking suddenly demanded. However, if the treatment is also wrong, it could cause danger. In order for the following car passengers safe, follow the steps below :

  1. Stepped on the brake pedal as hard until you hear a squeal of floating.
  2. If the wheels lock, reduce the brake pedal because of the effects pedal, the car can not be controlled.
  3. Can also be done braking pulse method. Namely, the brakes as hard as possible over and over again. In at least one second there four times a pedal.
  4. Notice the mirror and see if the car behind a truck or bus-like-we can put the brakes as well. If not, and before the "smell", fast moving lines.

Other Post :



1 comment:

  1. always tend to configure and set up your car and brakes regularly. Its better to be sure and be prepared to avoid unexpected events and accidents.

    ReplyDelete