Tips to Install Power Window Switch or the Central Lock

Power Window Switches or Central Lock in principle have the same working method. there are differences in function. Power Window is used to lower or raise the car window, while the central lock to lock and close the car door.

This Tip discusses how the use of Switch for installation and Central Power Window Door Lock on our vehicles.

In theory, the workings of the motor or motors Power Window Central Lock Actuator is the supply voltage to lower the window / lock the door, while to raise the window / door is unlocked by turning the voltage plus (+) and min (-).
In other words, two cables coming out of the motor and Central Lock Power Window Actuator (mostly green and blue), used by way of tossing and turning the entry of polar voltage.

Practical switch is sold in stores accessories / partshop. Consisting of five feet, and provided the terminal block to connect the switches can be removed easily.

For this purpose, it should also be provided a terminal - female as much 5 unit and crimpler for installation of these terminals.

 
For the schematic diagram, please refer to the chart below :

To better understand the practical workings of this switch, please look at the animation that I made below.  

Other Post :